Home > News > Content

Product Categories

Contact Information

  • Qingdao Ted Machinery CO.,Ltd.
  • ADD:No.1089,Zhaizishan road,Huangdao District,Qingdao Shandong CHINA
  • Tel: +86-0532-86199296
  • Mob: +8613808977810
  • E-mail:info@qdtedmachine.com
  • The Angle Adjustment Of The Shot Blasting Machine Is Very Important
    Sep 06, 2018

    The projection Angle of the projectile throwing machine should be investigated and adjusted in time. The projectile throwing machine provides a special rule, which can control its direction in the planning.After the casting, it will be on the metal plate, see the point left or right is not in the Angle or 90 degrees of the base is the best, beyond the planning should be adjusted in time.Only the reason of Angle adjustment can properly advance the speed of projectile, make the machine operate smoothly and reach the optimal mechanical performance.It is assumed that after the adjustment is completed, it will go wrong, adjusting the distance and Angle of the swing arm's fastener until it reaches the optimal Angle so far.

    The structure of the shot blasting machine is very complex, if misuse, will cause damage to the machine.So you need to be clear about how you can use the machine with safety standards.First of all, it should be protected and maintained. Second, some parts should be replaced on time. If the above points are achieved, the machine can be used continuously.

    Impeller head is the primary part of the shot blasting machine. The accuracy of the position of the impeller head directly affects the normal work of the machine.The control of the shot blasting device should be careful that the orientation of directional explosion should be cleaned in the work-piece so that the projectile can be fully covered, otherwise it will affect the cleaning efficiency.